(For Spanish ISPs & Users requiring Hex PLOAM)

This guide provides the complete procedure to change your firmware and configure a 20-digit Hexadecimal PLOAM (e.g., for Digi, Movistar, Orange).

1. Initial Connection / 初始连接

• Physical Setup: Insert the SFP into a switch, router, or media converter and connect your PC.
• PC IP: Manually set your computer's IP to 192.168.1.100.
• Web Login: Access 192.168.1.10 via browser (User: root, Password: [None]).
• Language: You may change the language to English/Chinese in the System menu. Save and Reboot before proceeding.

2. Firmware Upgrade / 更换固件

Since the default WebUI does not support Hex PLOAM, you must upgrade to the OpenWrt-based firmware.

• Download: Get the firmware from hack-gpon.org.
• Flash: Navigate to System -> Backup / Flash Firmware.

• Action: Upload the image file and click Flash image.

• Note for Unifi Users: If "EEPROM detection error" appears, simply plug in the fiber cable; it usually clears after 24–48 hours of use.

3. Hex PLOAM Setup (via SSH) / 配置 Hex PLOAM

Standard Web interfaces often fail with Hex values. You must use the terminal.